For some table saws, a dust collection system is just a bag that collects the dust generated from your table saw. This might do the job perfectly well for many novice table saw users, whilst others might benefit from a more sophisticated dust collection system. Either way, it’s of paramount importance to make sure that you pick up any dust generated by your table saw, as it could be dangerous in the long term to both you and your family.

As you can tell, this particular type is in the middle between portable and contractor. Some people can finish their projects with bench top saws, but the ones who can’t usually opt for hybrid saws because they are cheaper than contractor ones. One cannot say they are cheap per se, but it’s a significantly smaller investment in comparison to contractor models.
At first glance, the Bosch 10-Inch Worksite Table Saw may seem to be nothing exceptional. However, it's powered by the best motor in its class, and it does everything well. True, the motor is a 15 amp unit like the others on our list, but it produces 4 HP where the others produce only 1.5 to 2 HP. This is a noticeable step up in a vital area! The wheeled frame is extremely helpful for moving around your shop or garage, but keep in mind that those tires aren’t heavy-duty; you have to be careful with them on a worksite littered with nails and screws.
The best overall performance in our testing was the Skilsaw SPT99-12. The Skilsaw was described by many of the TBB crew as a beast and the data reinforces that. Regardless of the type of material the Skilsaw SPT99-12 offered the lowest drop in RPM’s and the lowest increase in AMP draw. Following in second place is the Hitachi C10RJ and the DEWALT DWE7491RS in third place.
The cabinet saw available on the market today is the SawStop ICS51230-52 5 HP 230V 60 Hz Cabinet Saw with 52-Inch Industrial T-Glide Fence System, which comes with the longest fence system that you’ll find. Not only is that system easy to use, but it allows you to make different types of cuts and change the orientation or angle of the wood to the blade.
Both saws accomplish the same thing, but with different results. SawStop’s feature takes about 90 seconds to recover from compared to roughly 1 minute with Bosch. Bosch developed the REAXX to drop the blade without damage while SawStop usually results in a damaged blade that needs to be replaced. The SawStop employs a brake that must be changed after activation at a cost of $69 each. Bosch uses a dual airbag style cartridge. These run $99 each, but you get two shots out of each one.

Bosch’s REAXX and SawStop were neck and neck with near perfect cleanup at the collection point and only a slight amount of dust coming out toward the user. What did make it out was even less coarse than the other Pro level saws. Both saws have narrower throat openings for the blade that reduce the amount and size of material that can make it out. In the end, SawStop produced less top dust than Bosch did to earn the win.
If we were going to choose one saw above all the others for our own woodworking shop, we would choose the Grizzly G0690. It’s got a relatively small footprint, it’s built like a tank, and its provides exceptional stability and vibration dampening. For a cabinet table saw in its class, you just can’t beat the value or performance that the Grizzly G0690 provides. Definitely check one out when you start shopping for your cabinet table saw, as it does not disappoint.
It is an extremely durable and sturdy product. However, there are some drawbacks. First of all, it is expensive without quite backing up that price in all areas. It does not really have the elite safety feature of our top choice, and it also lacks high-end power. These are minor points (it is still safe and powerful), but you expect it to be perfect at this price.

Additionally, the bevel dial is accurate to within ¼ of a degree, making ultra-precise angle cuts easily repeatable. The base of the 36-L552 is also constructed of solid cast-iron, adding balance and stability even when cutting through the toughest hardwood. An aggressive blade guard and splitter design also helps prevent both accidental contact with the blade and pinching or kickback from the kerf even on extended cuts.
Depending on how often you work with wood and the type of wood that you use, you may find that this SawStop PCS175-PFA30 1.75-HP Professional Cabinet Saw Assembly is better suited to your needs than some of the company’s more expensive models are. This saw features a smaller base and a shorter extension table that take up less space, but you can use the fencing system to extend the size of the table working with your boards.
How big a table saw is, is determined by the largest blade the saw will hold. 8” blades are the smallest that should be used for any home workshop. You can get blades in 9”, 10”, and 12” sizes as well. Most workshops will not really need the 12” blade as this has a very deep cut capability, but for construction firms and larger, commercial shops, the 12” comes in handy.
If you are an avid hobbyist, this saw is made just for you. The company is known for its uncompromising quality and durability. This saw has a safety system where the blade stops and retracts automatically when it comes into contact with anything that is not wood.  The microblade guards keep debris from flying all over your workshop. It is easy to change between blades. You will not require a riving knife to do this. Its award-winning dust collection system ensures that you have a clean and presentable workspace at the end of the day.
Cutting a board to length by using the fence as a guide is one of the most dangerous yet very common techniques. The fact that it’s quite common among DIY-ers doesn’t make it safe. In fact, it’s extremely dangerous and can lead to fatal consequences. There is a high risk of kickback if you’re using this particular technique. Needless to say, the forces involved are immense, and you’ll end up with a piece of wood in your face. One could say – “But, I’m wearing safety goggles!” Even though it may be true, goggles won’t do much against a dense piece of wood flying straight to your face a few hundred miles per hour.

I got the Hitachi 1 1/2 mouths in the motor died. Says it has a 5 year warranty. I’ve been trying for weeks to get it resolved. Ended up giving up and headed to buy another saw. I understand having products be faulty it’s a numbers game it has to happen to some one. How ever the complete no help to resolve it from Hitachi. Is a problem after a week of back and forth they said they would set up a pick up time to ship and get it repaired over a week still no call back for a pick up. I can’t say enough avoid this headache. I’ve been a contractor for a decade and have had may tools break or need repair. First experience I’ve had that’s made me swear off a brand.hope this will save some one from wasting money and time
The purchase of a table saw is no doubt a big investment. But there is a lot of flexibility in this class of tools to find one that fits in with your budget and your wants. Make sure to take into account how you will need to use the tool and where you will need to use it. Heavier models will be sturdier but they will also require more effort to load up when you need to.

Using improper technique with this can lead to unsatisfactory results. Next, remember to always keep the resistance and kickback the machine will give off under control by using the fence. Make sure that the fence is adjusted in such a way that will keep the wood tightly wedged between the fence and the blade and that you are able to secure the fence down properly before you begin work.
An excellent choice both for professional woodworkers and hobbyists with a more expansive tool budget, the Shop Fox W1819 is a 10 inch table saw ideal for making clean cuts along greater lengths of material without pinching or kickback. The blade itself is covered while in operation by a clear polycarbonate blade guard that moves back as the workpiece is passed along over the blade.

For ideal usage, the on/off switch needs to be mounted on the front of the saw and should be easy to turn off with your knee or a swat without having to look at it to locate it. Most table saw models have a safety feature that is a plastic key that has to be inserted before the table saw can be turned on. Some may even have a way to padlock the switch.
When considering the type of saw you need for your projects, think about the type of work you want it to do, how much time will be used, the amount of money you want to spend and how much room you will have in your shop for it. If you are only a weekend woodworker and only work an hour or so each time you use it while doing small craft projects the cabinet saw may be a perfect option for you. However, if you own a small woodworking shop and will be working many hours every day with the saw the hybrid would probably be more suited. Before purchasing a saw for your needs, research by reading other consumer table saw reviews to give you the best options.

Ridgid seems to get mixed reviews from users, maybe due to its lower price point, but continues to impress us in head to head competitions. With this edition, Ridgid’s 15 amp motor powered through cuts better than any other saw we tested. Sure it was close, but it consistently beat out each competitor. That power does come with more vibration than some of the others though.
A table saw is a powerful tool that makes short work of even large pieces of lumber, allowing you to make rip cuts down the grain of boards, beams, and even entire sheets of plywood. No carpentry shop or professional construction site is complete without a table saw. Deciding which saw is best suited to a given home workshop, furniture production factory, or building site is an important decision and merits careful consideration.
To provide the ultimate vibration control and stability, the entire cabinet rests on the heaviest cast iron base in the industry, and all steel cabinet components and the cast iron table top are factory fitted to prevent slippage and rattle. Speaking of the table top, the capacious workspace makes shaping and fitting even the longest workpieces quick and easy thanks to its rock-solid support. Dust collection is accomplished via the blade shroud below the table, and can be connected directly to a shop vac thanks to the standard 4-inch diameter power in the rear section of the cabinet.
The cabinet saw available on the market today is the SawStop ICS51230-52 5 HP 230V 60 Hz Cabinet Saw with 52-Inch Industrial T-Glide Fence System, which comes with the longest fence system that you’ll find. Not only is that system easy to use, but it allows you to make different types of cuts and change the orientation or angle of the wood to the blade.
Cutting a board to length by using the fence as a guide is one of the most dangerous yet very common techniques. The fact that it’s quite common among DIY-ers doesn’t make it safe. In fact, it’s extremely dangerous and can lead to fatal consequences. There is a high risk of kickback if you’re using this particular technique. Needless to say, the forces involved are immense, and you’ll end up with a piece of wood in your face. One could say – “But, I’m wearing safety goggles!” Even though it may be true, goggles won’t do much against a dense piece of wood flying straight to your face a few hundred miles per hour.

Craftsman 10 table saw Craftsman Radial Arm saw 10Craftsman 16 direct drive scroll saw Chicago Electric 10 compound Slide Miter saw Wagner power painterBlack and Decker rotary saw and jig sawCraftsman corded drill. Craftsman 10 compound miter saw.Cleaning out my shed and am trying to downsize. $550 or best offer and its all yours. Ill help load but wont deliver. Great Christmas gift for that ha...


Thanks for the work you put in on this. I am retired now and have been researching these types of saws as I wish to begin doing some building of storage shelves and deck furniture. As a beginner, I did not wish to spend huge amounts of money until I was sure it was something I would be staying with for a while :-). Very informative and happy to see the way you did your testing (on the video). I spent 20+ years testing or working with security software testers and totally understand the issues of testing (almost anything) in a fair and honest way. Your work is greatly appreciated!.

You’ll also want to make sure that you’re getting a model that doesn’t have a problem with internal dust collection. Some don’t do a great job of funneling the dust towards the port, so it ends up sitting inside the unit. This can affect performance, as sawdust is great at gumming up moving parts. So, if you get one of those models, know that you’re going to have to regularly open it up and clean it out to keep it in tip-top shape, which is a pain, but necessary if you want your unit to last a long time.
We really should point out a big deal here and that’s the SawStop. It’s hard to put a price on safety and while the SawStop costs more than 3 times what the Hitachi costs it does offer safety that no other saw in test can offer. For those that can afford the additional cost that feature alone may tip the scales for you. Regardless of price SawStop came in 5th place for the categories we evaluated.
All the articles on this website are short and punchy without much filler, but because there is so much to learn about table saws it will still take you the better part of an afternoon to read through them all. For those who don’t have that kind of time, or those who already know a great deal about table saws, this is the section that will take you to the best table saw for your needs.
×